Header Spacer

HOME > PRODUCTS > 3 in 1 Spray Plastering Machine

Model RBM - 1000

PRODUCT FEATURES AND ADVANTAGES

The big-capacity RBM-1000 comes complete with a mixer, a main engine pump with output capacity of 7.5 m3 and foam generator capable of churning our 600 liters per minute. Other features and fittings include: (i) auto weighing scale for every kind of raw materials, i.e., foam, water, cement, fine sand (by installing the Load Cell Weighing System) for homogeneous formulation of mortar foam; (ii) water cooling system; (iii) high mobility, i.e., can be easily moved and/or set up at construction site; (iv) built-in automatic air switch to control machine (on/off options) whilst the main engine is in operation; (v) adaptability and flexibility, in being deployable as a spray plastering machine or Chipping Concrete Infill and EPS Mortar Infill and other standard mortar formulations.

ADVANTAGES OF RBM FOAM CONCRETE MACHINE
MODEL: RBM-1000


The RBM Foam Concrete Machine (RBM-1000) is a cast RBM insulated lightweight concrete for partition and party wall with fast, easy and saving cost advance method to having a straight wall.

The building of partition and party walls using RBM insulated lightweight concrete which is good insulation and 4 hours fire rating SIRIM tested (Bomba Certificate BB/FCW/1405/2009)as an alternative, non-conventional methods replace of traditional bricks laying and plastering job method is now possible with the RBM Foam Concrete Machine (RBM-1000).

The technique of controlling a consistent mortar mix, perfected by RBM Building Machinery Trading Sdn Bhd (RBM) uses the RBM insulated lightweight concrete comprising ingredients mixed in specific compositions and pumped into formwork. Once the RBM insulated lightweight concrete dries, the formwork is dismantled and the partition or party walls are ready, in triple quick time.

A typical cost comparison for wall materials is tabulated below for easy reference

This model machine can be established to the construction site as a mobile mini batching plant include witha a big capacity pumping system for foam concrete mortar, cement mortar and can be a spray plastering machine. This model compact with auto weighing scale for every kind of raw material such as foam, water, cement and fine sand by installation of Load Cell weighing system, so it can efficently produced standard and quality of mortar all the time. the inventiveness of water cooling system for the pumping chamber also had been implemented inti his model. These machine also build in with automotive air switch to control machine to on/off while operating the main engine pump. Beside this, its also able to produce Chipping Concrete Formwork infill (Chipping Concrete Mix) and Solid Wall panel with eps mortar Infill and others standard mortar formulation.

RBM - 1000 Catalog

Click for Detail Click for Detail
Click for Detail Click for Detail

 

 

MODEL RBM-1000 Tank Volume Pumping Capacity Speed Motor Overall Size (mm³)
Mixer 0.65m³ - 40~80 rpm 4kW, 415V, 50Hz 2500(L) x 1500(W) x 1660(H)
Hopper 0.60m³ - 22rpm 0.75kW, 415V, 50Hz
Main Engine Pump - 0~7.5m³ 0~240 rpm 7.5kW, 415V, 50 Hz
Foam Generator 400 litres 600 litres/min - - 2π x 387.35²(r) x 914.40(H)


MODEL : RBM 1000

Mixer : Tank Capacity

Mixing capacity

Mixing Speed

E-Motor

650 Litres

500 Litres

40rpm ~ 80rpm (variable speed control)

4kW, 380V-415V, 50Hz

Mortar Pump:

Out Capacity

Pumping Distance

E-Motor

Squeeze Type

0 ~7.5m³ / hr

125m height, 250 horizontal

7.5kW, 380V-415V, 50Hz

Cement/sand Feeder (optional) :

Length

Height

E-Motor

Belt Conveyor 350W

5 m

2 m

0.75kW, 380V-414V, 50Hz

Overall Unit Size :

Length

Width

Height

 

2.50m

1.50m

1.66m

Total weight 980kg

  • 3-in-1 Spray Plastering Machine

Contact  contact    Enquiry  enquiry    Sitemap  sitemap